|
Hemp - Olive Oil Soap
8 oz. Olive Oil
8 oz. Hemp Oil
2.1 oz. Lye
6 oz. Distilled Water
.7 oz
Fragrance/Essential Oil
See directions below...
|
|
Hemp
Oil Soap
16 oz. Hemp Oil
6 oz. Distilled Water
2.1 oz. lye
Fragrance/Essential Oil .7 oz.
See
directions below... |
|
Hemp, Coconut, Olive Oil
5 oz. Coconut Oil
5 oz. Hempseed Oil
6 oz. Olive Oil
2.3 oz. lye
6 oz. water
Fragrance/Essential Oil.7 oz.
See
directions below... |
Safety Reminder:
If you are new to cold
process soap making, please purchase a book and read about the serious
safety issues associated with lye. A good book to start with is Susan Miller
Cavitch's "The SoapMakers Companion." When handling lye, please use
gloves and goggles and do not breathe in the fumes.
Remember, the lye water mixture is
always added to the oil and not vice versa.
Recipes
:
1
pound Hemp Oil Batch
16 oz.
Hemp
6 oz. Distilled Water
2.1 oz. lye
Fragrance/Essential Oil .7 oz.
1
pound Hemp/Olive Oil batch
8 oz.
Olive
8 oz. Hemp
2.1 oz. Lye
6 oz. Distilled Water
Fragrance/Essential Oil .7 oz.
1 pound Hemp/Coconut/Olive Oil Batch
5 oz. Coconut Oil
5 oz. Hemp Seed Oil
6 oz. Olive Oil
2.3 oz. lye
6 oz. water
Fragrance/Essential Oil .7 oz.
Directions :
Suit up in safety
goggles, gloves and long sleeves. Add the lye to the water. Stir well taking
precautions to not breathe in the fumes. Set the mixture to the side and
allow it to cool to approximately 110F. You can put the lye water mixture
outside if you are not in a well ventilated area.
Add all the oils
together and melt. Allow them to cool to approximately 110F, or within 5
degrees of the lye water.
Add the lye water to
the melted oils, carefully. Stir vigorously until trace occurs. Trace looks
like a thin pudding. A stick blender will help speed trace along. If you are
stirring by hand, this recipe may take up to an hour to trace.
Pour your traced soap
mixture into your moulds. Pop out after 3 to 5 days and allow to sit for a
full 4 to 6 weeks to cure and finish the saponification process.
|